WIZ750SR-105

Description

The WIZ750SR-105 is a Serial-to-Ethernet Module featuring a Cortex-M0-based W7500 MCU and an external PHY IC

The WIZ750SR-105 converts serial data to TCP/IP packets for Ethernet transmission, and TCP/IP packets back to serial data for the connected device. It allows devices with serial interfaces to be easily network-enabled, enabling control of serial equipment over an Ethernet network

Hardware pin-compatible with the WIZ105SR series, featuring a dedicated serial debug port and four user I/Os for control and monitoring (analog input / digital I/O)

Control commands compatible with WIZ107SR/WIZ750SR, and firmware, AT commands, and configuration tools are interoperable with WIZ750SR

Features

• Industrial Temperature: -40°C to 85°C
• TTL Operation (RS-232 Supported with WIZ105SR-EVB)
• W7500 IC Based
• Compatible with WIZ110SR in Hardware
• up to 230Kbps baud rate and 10/100 Mbps Ethernet
• Serial Data Line via Pin Header(2×6, 2mm pitch pin-header)
• Configurable 4 User I/O pins
• Status Pins : PHY link status / TCP connection status
• Serial Signals
  • WIZ750SR-105(TTL Type) : TXD, RXD, RTS, CTS
  • WIZ105SR-EVB(RS-232 Type) : TXD, RXD, RTS, CTS
  • Selectable DTR/DSR Signal Support (Can be configured to use either Status Pin or DTR/DSR)
• Separate Data UART and Debug UART
• Supports Connection Password
• Supports serial commands and configuration tool for product setup
• Supports WIZ VSP (Virtual Serial Port) Software
• Built-in 10/100 Mbps Ethernet ESD Protection IC
• Enhanced stability and reliability with built-in Supervisor IC
• PCB Board design : 62mm x 40mm (Length x Width)
• Compact size design : 62mm x 40mm x 18mm (Length x Width x height)

Documents and Tools

• Datasheet
• User ManualKOR/ENG)
• Configuration Tool
• WIZVSP